All oiling locations require one drop of oil.

Lubrication points:

• Rail on the rotary hook
• Presser foot drive shaft
• Needle bar drive shaft
• Needle bar drive shaft – presser foot
• Inside the arm
• Needle bar
• Inside the cylinder bed
• Felt packing (needle bar)

Get your copy of the ESP9000 Oiling Maintenance Schedule

Tools:

	LB5 Lubricant Embroidery machine oil with a metered valve designed to release one drop of oil when depressed
	Hypo-Dot Oil Bottle Refillable oil bottle with hypodermic point for easy accurate release of oil
	Lint and Dust Remover
	Offset Screw

[back to top]

 

Rail on Rotary Hook:

Every four hours 1 oiling spot Remove the needle plate Using the offset screwdriver remove the 2 screws from the needle plate Using canned air clean out the rotary hook Rotate the hand wheel to expose the rail on the rotary hook Using the Hypo-Dot place one drop of oil on the rail Press trim 2 times to lubricate the whole rail

[back to top]

 

Presser Foot Drive Shaft:

Daily (Every 8 hours of usage) 1 Oiling Spot Place 9000 on needle position 1 Look to left side of 9000 and using the LB5 spray one drop of oil in the red hole

[back to top]

 

Needle Bar Drive Shaft:

Daily (Every 8 hours of usage) 2 oiling spots 1 on needle position 1 and 1 on needle position 15 Using the Hypo-Dot place one drop of oil on the white plastic rail (in the canal)

[back to top]

 

Needle Bar Drive Shaft - Presser Foot:

Weekly (every 40 hours of usage) 2 oiling spots Place 9000 on needle position 15 Oiling spots are covered on machine you will see 2 windows Window 1 Using the Hypo-Dot place 1 drop on the wick Window 2 Using the LB5 spray one drop of oil on the bar

[back to top]

 

Inside the Arm: 

Weekly (every 40 hours of usage) 3 oiling spots (LB5 on all 3 spots) 1 on needle position 1 and 2 on needle position 15

[back to top]   

 

Needle Bar:

Weekly (every 40 hours of usage) 15 oiling spots Open the front face cover to expose the thread take up levers Using the LB5 spray one drop of oil on each needle bar

[back to top]

Inside the Cylinder Bed:

Once a month 1 oiling spot Using the LB5 spray 1 drop of oil in the red spot directly behind the needle plate

[back to top]

Felt Packing (needle bar):

Once a month 5 oiling spot Using the LB5 spray one drop of oil in each of the five red spots below the front face cover