Instructions for Oiling the TOYOTA ESP9000

All oiling locations require one drop of oil.

Lubrication points:

 Get your copy of the ESP9000 Oiling Maintenance Schedule

Tools:

  • LB5 Lubricant Embroidery machine oil with a metered valve designed to release one drop of oil when depressed
  • Hypo-Dot Oil Bottle Refillable oil bottle with hypodermic point for easy accurate release of oil
  • Lint and Dust Remover
  • Offset Screw

    • [back to top]

    Rail on Rotary Hook:
  • Every four hours
  • 1 oiling spot
  • Remove the needle plate
  • Using the offset screwdriver remove the 2 screws from the needle plate
  • Using canned air clean out the rotary hook
  • Rotate the hand wheel to expose the rail on the rotary hook
  • Using the Hypo-Dot place one drop of oil on the rail
  • Press trim 2 times to lubricate the whole rail
    • [    back to top]

    Presser Foot Drive Shaft:
  • Daily (Every 8 hours of usage)
  • 1 Oiling Spot
  • Place 9000 on needle position 1
  • Look to left side of 9000 and using the LB5 spray one drop of oil in the red hole
    • [    back to top]

    Needle Bar Drive Shaft:

  • Daily (Every 8 hours of usage)
  • 2 oiling spots
  • 1 on needle position 1 and
  • 1 on needle position 15
  • Using the Hypo-Dot place one drop of oil on the white plastic rail (in the canal)
    • [    back to top]

    Needle Bar Drive Shaft - Presser Foot:
  • Weekly (every 40 hours of usage)
  • 2 oiling spots
  • Place 9000 on needle position 15
  • Oiling spots are covered on machine you will see 2 windows
  • Window 1 Using the Hypo-Dot place 1 drop on the wick
  • Window 2 Using the LB5 spray one drop of oil on the bar
    • [    back to top]

    Inside the Arm: 


  • Weekly (every 40 hours of usage)
  • 3 oiling spots (LB5 on all 3 spots)
  • 1 on needle position 1 and
  • 2 on needle position 15 
    • [    back to top]

    Needle Bar:
  • Weekly (every 40 hours of usage)
  • 15 oiling spots
  • Open the front face cover to expose the thread take up levers
  • Using the LB5 spray one drop of oil on each needle bar
    • [    back to top]

    Inside the Cylinder Bed:
  • Once a month
  • 1 oiling spot
  • Using the LB5 spray 1 drop of oil in the red spot directly behind the needle plate
    • [    back to top]

    Felt Packing (needle bar):
  • Once a month
  • 5 oiling spot
  • Using the LB5 spray one drop of oil in each of the five red spots below the front face cover
    • [    back to top]


    If you have additional questions please feel free to contact our service department Service@Pantograms.com .

    Pantograms also provides "emergency" software and machine support from 10:00am to 2:00pm Eastern Standard Time on Saturdays.  To reach a machine technician or a software support rep please use the following numbers:

    After Hours Support
    TOYOTA Machine Service (Saturdays only) 888-920-9957
    Software Support (Saturdays only) 888-861-5165

    Please be advised that messages left on either of these numbers are only checked on Saturdays. If you need assistance during our normal business hours please call us at 800-872-1555.

    For more information CLICK HERE

     Click here to return to the General Embroidery Tips home page