|
Initializing the
Memory Through the Service Mode
Sometimes it is necessary to
initialize the embroidery machine's memory by putting it into
the Service Mode. Initializing through the Service Mode
not only clears out all job numbers but also any F1
functions. Basically, the machine is reset with the
factory settings.
There are several steps to
follow:
- Turn the embroidery machine
off.
- Locate the removable cover
on the right side of the control panel and pull back to
reveal two banks of dip
switches.
- Turn the #1 dipswitch in the
bottom set to the On position.
- Turn the embroidery machine on
and push the SET button three times.
- Once the control panel reads
Input through PC or Format-Toyota, turn the machine off.
- Turn the #1 dipswitch in the
bottom set to the Off position, and then turn the machine
back on.
- Don't forget to reset any F1
features, such as Satin Adjust
|
